Turnbuckle closed form with welding ends
TURNBCKL-CLSD-WELDONEND-1478-M12
Art.-no. 05210712
EAN 4052703932207
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Diameter (d2) | 18 mm |
Diameter 3 (d3) | 25 mm |
Diameter 2 (d4) | 10 mm |
Length (l1) | 125 mm |
Length (of welding end) (l2) | 150 mm |
Standards | DIN 1478 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Flange cap GPN 680
Threaded fitting ASME B18.31.2 with 2 nuts, D60 stainless steel with 3.1 certification
Low-cut safety shoes, S3 Steitz VD PRO 3500 BOA SF
Wing nut, round wing shape (German type) DIN 315, zinc plated malleable iron with thick-layer passivation (VZD)
Cable pull for aluminium rope-operated ladders
Combination wrench, inch
Key, high profile DIN 6885 steel, type AS
Hexagon bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
CA preparation unit size 1, regulator