Turnbuckle closed form with welding ends
DIN 1478 steel zn ptd. closed shape w. welding end
TURNBCKL-WELDONEND-DIN1478-A2K-L235-M12
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Diameter (d2) | 18 mm |
Diameter 3 (d3) | 25 mm |
Diameter 2 (d4) | 10 mm |
Length (l1) | 125 mm |
Length (of welding end) (l2) | 150 mm |
Standards | DIN 1478 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Bit, PZ recessed head C 6.3 (1/4 inch) Impact Flex
ABS Roofer set
Counter nut SKINTIGHT SM-M
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Lock washer DIN 6799, plain bronze, collated
Sealing washers DIN 7603, steel, plain, shape A
Crimping insert For Mobile Crimp Tool crimping pliers
Flat head drilling screws with recessed head and self-tapping screw thread
EPS profile double cylinder
Hexagonal bolt with thread up to the head DIN 933, steel 12.9, plain