Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBCKL-WELDONEND-DIN1480-(A2K)-M24
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d) | M24 |
Turnbuckle-sleeve length (l) | 255 mm |
Turnbuckle-sleeve width (external) | 60 mm |
Outer diameter of sleeve end | 39 mm |
Turnbuckle-sleeve width (internal) | 28 mm |
Turnbuckle-sleeve diameter | 20 mm |
Length (of welding end) | 260 mm |
Thread length (metric thread) | 150 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Safety knife Martor Secunorm 525 52500410
Fire protection duct I30/I60/I90/I120
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Threaded fitting
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
Pin punch In accordance with DIN 6450 form C with hardened impact head
Hexagonal nut, imperial
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive