Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBCKL-WELDONEND-DIN1480-(A2K)-M6
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d) | M6 |
Turnbuckle-sleeve length (l) | 110 mm |
Turnbuckle-sleeve width (external) | 19 mm |
Outer diameter of sleeve end | 12 mm |
Turnbuckle-sleeve width (internal) | 9 mm |
Turnbuckle-sleeve diameter | 6 mm |
Length (of welding end) | 120 mm |
Thread length (metric thread) | 65 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Flat square For FB windowsill duct
Injector socket For Ford 2.0 TDCI EcoBlue engines
UV 50 sun protection spray
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
Metal box, size 3 Empty
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Shoelaces