Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBUCKLE SLEEVE W.WELD.STUD M36
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M36 |
Turnbuckle-sleeve length (l) | 295 mm |
Turnbuckle-sleeve width (external) | 86 mm |
Outer diameter of sleeve end | 55 mm |
Turnbuckle-sleeve width (internal) | 40 mm |
Turnbuckle-sleeve diameter | 28 mm |
Length (of welding end) | 300 mm |
Thread length (metric thread) | 180 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Work overall
STARLINE® Plus trousers
Additional funct. 4KS seawater-resistant (SEW)
SNAP marker
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A2 stainless steel, plain
Drilling screw, hexagon head and Varibos set screw With hexagon head and set screw
G-fuse 5x20
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Identification rings, PVC
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment