Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
DIN 1480 steel zinc plated with welding ends
TURNBUCKLE SLEEVE W.WELD.STUD M42
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M42 |
Turnbuckle-sleeve length (l) | 295 mm |
Turnbuckle-sleeve width (external) | 104 mm |
Outer diameter of sleeve end | 63 mm |
Turnbuckle-sleeve width (internal) | 50 mm |
Turnbuckle-sleeve diameter | 32 mm |
Length (of welding end) | 350 mm |
Thread length (metric thread) | 200 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Lanyard WAPS
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Low-cut safety shoes, S1
Telescopic support set
Die set/kit Ruko thread cutting tool set HSS 54 pieces
Stainless steel hinge, not detachable
Double cylinder S5 locking system
Spring plunger with ball
Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Work jacket