Turnbuckle sleeve, open form DIN 1480 (open shape), steel S235JR, hot-dip galvanised (hdg)
DIN/WN 1480 steel S235JR hot dip galvanized CE
TURNBCKLNUT-DIN1480-S235JR-CE-HDG-M24
Register now and access more than 125,000 products
- M27 not standardised according to DIN 1480
- Construction product with CE marking
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
Wind, stabilisation and cross bracing in steel and wooden constructions
 | |
Standards | DIN 1480 |
Material | Steel |
Surface | Hot dip galvanized |
Form | Open |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M24 |
Turnbuckle-sleeve width (external) (d1) | 60 mm |
Outer diameter of sleeve end (d2) | 39 mm |
Turnbuckle-sleeve length (l1) | 255 mm |
Thread length (metric thread) (m1) | 39 mm |
Adjustability | 170 mm |
Permissible load | 77 kN |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Die set/kit Ruko thread cutting tool set HSS 44 pieces
Suction cup with pump
SC 90° countersink DIN 335C
Thread-rolling screw
ABS Lock Falz IV RB
System insert, raster foam Pluck out the foam cubes to fit around items
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Control module 3 for LED-T-12-5
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar