Turnbuckle sleeve, open form DIN 1480 (open shape), steel S235JR, hot-dip galvanised (hdg)
DIN/WN 1480 steel S235JR hot dip galvanized CE
TURNBCKLNUT-DIN1480-S235JR-CE-HDG-M8
Register now and access more than 125,000 products
- M27 not standardised according to DIN 1480
- Construction product with CE marking
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
Wind, stabilisation and cross bracing in steel and wooden constructions
 | |
Standards | DIN 1480 |
Material | Steel |
Surface | Hot dip galvanized |
Form | Open |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M8 |
Turnbuckle-sleeve width (external) (d1) | 23 mm |
Outer diameter of sleeve end (d2) | 15 mm |
Turnbuckle-sleeve length (l1) | 110 mm |
Thread length (metric thread) (m1) | 15 mm |
Adjustability | 75 mm |
Permissible load | 8.4 kN |
Last viewed
Starline Plus work dungarees
Tubular rivet shape A
Countersunk head screw with square neck DIN 608, steel 8.8, plain with nut according to DIN 934
Power mounting tape
Shim ring DIN 988, steel, plain
EPS profile thumbturn cylinder
Barricade post with pull-out belt
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc flake silver (ZFSHL)
Hexagonal bolt with shank
W-FAZ/S Fixanchor with large washer DIN EN ISO 7093-1 (DIN 9021)