Turnbuckle sleeve, open form
DIN 1480 steel S235JR hot dip galvanized
TURNBCKLNUT-DIN1480-S235JR-(HDG)-M10
Register now and access more than 125,000 products
- < M12 and M27 without certificate of compliance
- ≥ M12 with certificate of compliance
- M27 not standardised according to DIN 1480
(Certificate of compliance → regulated construction product according to the sample administrative regulation technical building regulations, MVV TB, serial no. C 2.4.5.18)
Turnbuckle sleeves in accordance with DIN 1480 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
Wind and stabilisation braces in steel construction
 | |
Standards | DIN 1480 |
Material | Steel |
Surface | Hot dip galvanized |
Form | Open |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M10 |
Turnbuckle-sleeve width (external) (d1) | 30 mm |
Outer diameter of sleeve end (d2) | 18 mm |
Turnbuckle-sleeve length (l1) | 125 mm |
Thread length (metric thread) (m1) | 18 mm |
Adjustability | 85 mm |
Last viewed
Painter's fabric tape
Square spacer piece For beam clamp support clips type BF1
Work shirt Olymp Luxor Comfort fit Logo Busch
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
ABS 18 COMPACT M-CUBE cordless drill driver
Goniometer For rotating angle-controlled screw tightening
Weld-on electrode For electrode coupling
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Wood screw, DIN 96 A2 Half moon head with slot
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain