Turnbuckle with eyes
Stainless steel A4 shape A with eyelets
TURNBCKL-EYE-A4-M20
Register now and access more than 125,000 products
These products have not been developed and manufactured as slings or load-bearing equipment.
Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M20 |
Internal diameter of ring (d2) | 30 mm |
Turnbuckle-sleeve length (l1) | 300 mm |
Overall length of screw-in eyelet | 220 mm |
Length | 460 mm |
Thread length (metric thread) | 140 mm |
Standards | DIN Similar to 1480 |
Design | With eyelet screw |
Material | Stainless steel A4 |
Surface | Plain |
Form | Open |
Permissible load | 23440 N |
RoHS-compliant | Yes |
Last viewed
Star-shaped handle with connector and female thread
Washer ISO 7089 steel 200 HV zinc-plated thick-film passivated with sealing (ZSM)
pias® drilling screw, flat head with AW drive
Hexagonal bolt with shank
End cap set For REDOSLIDE Z60-HW/Z100-HW interior sliding door fitting
Stretch Evolution trousers
EPS profile thumbturn cylinder
Spring band clamp DIN 3021, shape B with handy clip, W.TEC
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagonal bolt with shank