Turnbuckle with flat leaf bolts and jam nut DIN 1480 (open shape), steel S235JR, hot-dip galvanised
DIN 1480 hot dip galv. w. flat leaf bolts CE
TURNBCKL-BLT-DIN1480-S235JR-CE-HDG-M20-X
Register now and access more than 125,000 products
Datasheets(X)
Wind, stabilisation and cross bracing in steel and wooden constructions
 | |
Standards | DIN 1480 |
Form | Open |
Material | Steel |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Design | With flat leaf bolt |
Thread type x nominal diameter | M20 |
Eye diameter | 20.5 mm |
Turnbuckle-sleeve length | 200 mm |
Turnbuckle-sleeve width (internal) | 24 mm |
Turnbuckle-sleeve diameter | 34 mm |
Turnbuckle-sleeve width (external) | 52 mm |
Overall length of flat leave bolt | 250 mm |
Min. distance between centre of hole and centre of hole | 440 mm |
Max. distance between centre of hole and centre of hole | 572 mm |
Permissible load | 53 kN |
Last viewed
Phillips and slotted bit, plus/minus
O-ring, metric
Locking system, DPS
Heuer parallel vice with adjustable central guide
Hexagon head serrated screw with flange
Hard hat uvex u-cap Premium, short peak
Divider set, flat for workshop trolleys in system dimension 8.4
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hammer drill bit Max Quadro-L Vario