Welcome to Würth Aerospace Solutions For trade customers only

Twist drill bit HSCo8 WN MAGMA

Twist drill, HSCo8, WN type, RH MAGMA
DRL-TWST-MET-WN-HSCO8-MAGMA-D10,0
ZEBRA

Art.-no. 0618941000
EAN 4061975572868

Prices for customers after login
Twist drill bit HSCo8 WN MAGMA

Art.-no. 0618941000

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The extremely long-lasting drill bit with Magma multi-layer coating and 8 % cobalt alloy for universal processing of conventional steels, titanium and hard-to-machine materials (e.g. Hardox) with high strengths up to 1550 N/mm².

Exceptionally high drilling stability and cutting force


Reinforced core and shortened spiral length according to DIN 1897 with a total length according to DIN 338



Extra-high level of resistance to breakage


Optimised cutting edge and special, flat helix angle



Special magma multi-layer coating and 8 % cobalt alloy


  • Up to 9x longer service life and up to 50 % faster cutting speed compared to uncoated drill bits

  • Up to 2x longer service life compared to conventional coatings

  • Heat-resistant up to 800 °C


Optimal centring during work and less effort required


135° tip angle and optimised split point



3-flat shank (from dia. 4 mm)


  • No spinning in the drill chuck: faster, more comfortable working

  • Optimal power transmission

  • Protects the drill chuck from damage

  • Little effort required to loosen and tighten the drill chuck


Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Materials that are difficult to machine (e.g. Hardox 400–500), such as excavator shovels, lorry attachments, armour plating, snow ploughs, agricultural machinery etc.

  • Holes in conventional steels where a long service life is required
Instructions

Where possible, use sufficient coolant and lubricant.

Suitable for machine type

Drill
Cordless screwdrivers
Pedestal drilling machine
Milling/drill center

Material to be processed

Hard and tough material

Quality

ZEBRA-Premium

Standard / drilling depth

CS / 3xD

Diameter (Ø)

10 mm

Length (l1)

133 mm

Chip flute length (l2)

43 mm

Shank diameter

10 mm

Shank style

3-face shank

Surface

Magma multilayer coating

Cutting material

HSCo8

Type

RH

Angle of the tip

135 Degree

Service life (points system)

4 of 4 points

Drilling speed (point system)

3 of 4 points

Bore hole quality (point system) ( )

4 of 4 points

Versatility (points system)

2 of 4 points

Drilling behaviour (point system)

4 of 4 points

Suitable for drill (points system)

4 of 4 points

Suitable for cordless drills (points system)

4 of 4 points

Suitable for upright drilling machine (points system)

4 of 4 points

Suitable for milling-drilling centre (points system)

3 of 4 points

Self-centring

Yes

Suitable for tensile strength up to

1550 N/mm²

Material of sub-group

Alloyed tempering steels
Nitriding steels
Tool steels
High-speed steels
Cast iron
Ductile iron
Malleable cast iron
Titanium
Titanium alloys
Hardox
Spring steels
Bronze, short-chipping
Bronze, long-chipping
Brass, short-chipping

Cutting values
For dia. 1.0-3.0
Material designationTensile strength from dia. 1.0from dia. 2.0from dia. 3.0
vcnf nfnf
fromtofromto fromto fromto
Steels
Unalloyed quenched and tempered steels≤ 1,000 N/mm²2025636079600,020318339790,030212226530,040
Low-alloy quenched and tempered steels≤ 1,000 N/mm²2025636079600,020318339790,030212226530,040
Alloyed quenched and tempered steels≤ 1,200 N/mm²812254638200,020127319100,03084912730,040
Nitriding steels≤ 1,200 N/mm²812254638200,020127319100,03084912730,040
Tool steels≤ 1,200 N/mm²812254638200,020127319100,03084912730,040
High-speed steels≤ 1,200 N/mm²812254638200,020127319100,03084912730,040
Stainless steels
Titanium and titanium alloys≤ 850 N/mm²710222831830,020111415920,03074310610,040
Special alloys≤ 1,200 N/mm²79222828650,020111414320,0307439550,040
Cast metals
Cast iron≤ 350 HB2030636695500,030318347750,040212231830,050
Spheroidal graphite and malleable iron≤ 350 HB1822573070000,030286535000,040191023340,050
Hard materials
Hardox≤ 1,250 N/mm²79222828650,025111414320,0357439550,045
Hardox≤ 1,550 N/mm²46127319100,0156379550,0204246370,030
Spring steels≤ 1,100 N/mm²810253831830,025127315920,03584910610,040
For dia. 4.0-6.0
Material designationTensile strength from dia. 4.0from dia. 5.0from dia. 6.0
vcnf nfnf
fromtofromto fromto fromto
Steels
Unalloyed quenched and tempered steels≤ 1,000 N/mm²2025159219890,050127315920,060106113260,080
Low-alloy quenched and tempered steels≤ 1,000 N/mm²2025159219890,050127315920,060106113260,080
Alloyed quenched and tempered steels≤ 1,200 N/mm²8126379550,0505097640,0604246370,080
Nitriding steels≤ 1,200 N/mm²8126379550,0505097640,0604246370,080
Tool steels≤ 1,200 N/mm²8126379550,0505097640,0604246370,080
High-speed steels≤ 1,200 N/mm²8126379550,0505097640,0604246370,080
Stainless steels
Titanium and titanium alloys≤ 850 N/mm²7105577960,0504466370,0603715310,080
Special alloys≤ 1,200 N/mm²795577160,0504465730,0603714770,080
Cast metals
Cast iron≤ 350 HB2030159223870,060127319100,080106115920,100
Spheroidal graphite and malleable iron≤ 350 HB1822143217510,060114614010,08095511670,100
Hard materials
Hardox≤ 1,250 N/mm²795577160,0634465730,0703714770,080
Hardox≤ 1,550 N/mm²463184770,0402553820,0502123180,060
Spring steels≤ 1,100 N/mm²8106377960,0605096370,0704245310,080
For dia. 8.0-12.0
Material designationTensile strength from dia. 8.0from dia. 10.0from dia. 12.0
vcnf nfnf
fromtofromto fromto fromto
Steels
Unalloyed quenched and tempered steels≤ 1,000 N/mm²20257969950,1006377960,1205316630,140
Low-alloy quenched and tempered steels≤ 1,000 N/mm²20257969950,1006377960,1205316630,140
Alloyed quenched and tempered steels≤ 1,200 N/mm²8123184770,1002553820,1202123180,140
Nitriding steels≤ 1,200 N/mm²8123184770,1002553820,1202123180,140
Tool steels≤ 1,200 N/mm²8123184770,1002553820,1202123180,140
High-speed steels≤ 1,200 N/mm²8123184770,1002553820,1202123180,140
Stainless steels
Titanium and titanium alloys≤ 850 N/mm²7102793980,1002233180,1201862650,140
Special alloys≤ 1,200 N/mm²792793580,1002232860,1201862390,140
Cast metals
Cast iron≤ 350 HB203079611940,1206379550,1405317960,160
Spheroidal graphite and malleable iron≤ 350 HB18227168750,1205737000,1404775840,160
Hard materials
Hardox≤ 1,250 N/mm²792793580,1002232860,1251862390,140
Hardox≤ 1,550 N/mm²461592390,0801271910,1001061590,110
Spring steels≤ 1,100 N/mm²8103183980,1002553180,1252122650,140
Key
vc = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Highly active, high-performance cutting foam for all machining work.
CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

High-performance cutting oil for the heaviest machining work and higher cutting speeds
Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Optimum results and safety for all materials and applications
Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE
Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm
x 1 pcs
ABS 18 COMPACT M-CUBE cordless drill/driver

DRLDRIV-CORDL-(ABS 18 COMPACT)-2X4.0AH

MASTER M-CUBE
Compact, powerful and brushless cordless drill screwdriver for moderate screwing and drilling work, developed by Würth to meet the requirements of tradesperson
x 1 pcs
CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Multi cutting oil for light to medium machining work
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information