Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146030-DIN338-D3
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 3.0 mm |
Length (l1) | 61 mm |
Chip flute length (l2) | 33.0 mm |
Shank style | Cylindrical |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Work dungarees
Work dungarees
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain
SC end mill, long, optional, four blade, variable helix DIN 6527L, HB shank
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Low-cut safety shoes, S1P
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
T-piece EN10242 B1, hot-dip galvanised malleable iron
Locking system DUAL