Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146033-DIN338-D3,3
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 3.3 mm |
Length (l1) | 65 mm |
Chip flute length (l2) | 36.0 mm |
Shank style | Cylindrical |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Square cable opening, two-part
HSS-Co5 end mill, short, triple blade, centre-cutting DIN 844K
Screw tap, machine, blind hole Ruko M DIN 376 HSCo plain shape C
Multinorm jacket
Sanding belt, wide VSM CK721X
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Dinging spoon
Hexagonal bolt with shank
Weather protection rain dungarees
Painters' spatula Made of flexible, high-quality steel (taper ground)