Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146052-DIN338-D5,2
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 5.2 mm |
Length (l1) | 86 mm |
Chip flute length (l2) | 46.0 mm |
Shank style | 3-face shank |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
WN type RN facade construction drill bit
Screw-in fitting for pneumatic air
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
ASSY® 4 PH fittings screw Steel zinc plated full thread pan head
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Shim ring DIN 988, steel, plain
Round head screw with square neck DIN 603, A4 stainless steel
Work jumper Basic ST702 sweatshirt
Sealant Seal Flex