Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146055-DIN338-D5,5
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 5.5 mm |
Length (l1) | 93 mm |
Chip flute length (l2) | 52.0 mm |
Shank style | 3-face shank |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
HSCo Multi Special MF thread machine tap for blind holes DIN 374
Acoustic insulation anchor W-SSD, type MB for fixtures with acoustic insulation requirements, with collar
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles
Hand tap, second tap HSS DIN 352
Allen key
Image S3 FLEXITEC® ESD safety boots
TopLine XL cover profile
Hexagon socket set screw with ring cutter
EPS profile double cylinder