Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146105-DIN338-D10,5
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 10.5 mm |
Length (l1) | 133 mm |
Chip flute length (l2) | 84 mm |
Shank style | 3-face shank |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Slotted raised countersunk head screw DIN 964, A4 stainless steel, plain
HSCo8 AlCrN annular cutter
Industrial wet and dry vacuum cleaner ISS 45-M AUTOMATIC
HSCo8 end mill, short, centre-cutting DIN 844K
Hexagon nut, low profile with fine thread DIN 439, A4 stainless steel, plain
OrgaAer front panel cover, central section
Slip protection
System transport trolley Can be used for ORSY® system cases in sizes 8.4 and 4.4 and ORSY®BULL
Safety goggles Spica®
Low head hexagon head bolt in hygienic design