Twist drill bit, metal Ruko DIN 338 HSS-G golden
Twist drill HSS-G golden DIN 338 Ruko
DRL-SPRL-RUKO-2146115-DIN338-D11,5
Register now and access more than 125,000 products
The twist drill bit creates a burr-free edge through very clean holes. It is possible to start the drilling immediately after attachment, with no pre-marking required. The fracture stability is increased by up to 50%, as the core diameter increases constantly in the shaft direction (from dia. 3.2 mm). 3-way milled clamping surfaces prevent the drill from spinning in the tool (from dia. 5.0 mm).
Datasheets(X)
For unalloyed and alloyed steels (up to approx. 900 N/mm² strength), for drilling thin-walled profiles and sheet metal up to 5.0 mm, plastics and wood.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 11.5 mm |
Length (l1) | 142 mm |
Chip flute length (l2) | 91 mm |
Shank style | 3-face shank |
Surface | Golden/black oxidized |
Cutting material | HSS-G |
Last viewed
Blind rivet, flat head
VARIFIX® L-shaped air duct mounting bracket With integrated sound-absorbing element
Pan head tapping screw, shape C with flange
Akura 44 profile thumbturn cylinder
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Safety boots, S3
Hose clamp with spring package W4, BASIC-Line
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
WÜPOFAST® black oxide chipboard screw Steel, browned, full thread, countersunk head, PZ