Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised offset shank
Twist drill HSS-R SO DIN 338 offset shaft Ruko
DRL-SPRL-RUKO-200115-DIN338-D11,5
Register now and access more than 125,000 products
The manufacturing process (no structural interruption) solidifies the material and thus makes it more elastic. This means that it offers increased fracture resistance and is suitable for robust drilling units. Ideal for drilling larger bore diameters. Suitable for all common drills with a chuck up to 13.0 mm.
Datasheets(X)
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 11.5 mm |
Length (l1) | 142 mm |
Chip flute length (l2) | 0 mm |
Shank style | Cylindrical stepped |
Surface | Plain |
Cutting material | HSS-R |
Last viewed
Connection piece, 1-way For Elmo® AP damp-room switch series
T-piece, reduced with solder connection EN1254, copper, 5130R
Cetus S1P low-cut safety shoe
Long angled locking plate with wall mounting
Threaded rod DIN 976, A2-70 stainless steel, shape A
Screw, cntrsnk head, 82 degree inch
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Taper-grooved dowel pin ISO 8745 steel plain
Stud with threaded end ≈ 2d
Coil spring DIN 2098, steel, plain