Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Twist drill HSS-G plain DIN 338 118° Ruko
DRL-SPRL-RUKO-214024-DIN338-D2,4
Register now and access more than 125,000 products
The fully ground twist drill bit has precise concentricity. The split point allows this drill bit to centre well and requires low feed force.
Datasheets(X)
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 2.4 mm |
Length (l1) | 57 mm |
Chip flute length (l2) | 12 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSS-G |
Last viewed
Hose clamp set, strap width: 9 mm 121 pieces
Vacuum/pressure hose For window repair
Stud with threaded end ≈ 2d
Hexagonal bolt with shank
Installation box, standard washbasin, masonry
Jamo plus 4 CSMP screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head with milling pockets
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Pipe clamp TIPP® Smartlock 2 GS With exclusive Würth quick-action closure for secure, fast installation
1C flat roof seal fleece inlay, roll
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)