Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Twist drill HSS-G plain DIN 338 118° Ruko
DRL-SPRL-RUKO-214070-DIN338-D7
Register now and access more than 125,000 products
The fully ground twist drill bit has precise concentricity. The split point allows this drill bit to centre well and requires low feed force.
Datasheets(X)
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 7.0 mm |
Length (l1) | 109 mm |
Chip flute length (l2) | 12.0 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSS-G |
Last viewed
ISO insert holder with S clamping system for TC indexable inserts
Wire end ferrule with plastic sleeve strips
Adjustable straight sealing cone reducer fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Cross handle with continuous insert nut
Hexagon nut MS 35649, cadmium-plated steel
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, plain
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Fastening clip
Zinc clip-on wheel weight For car steel rims