Twist drill bit, metal Ruko DIN 338 type UNI HSCo golden/SO Ruko
Twist drill HSCo golden/SO DIN 338 Ruko
DRL-SPRL-RUKO-228035-DIN338-D3,5
Register now and access more than 125,000 products
The shank ensures optimum power transmission. Drill bit does not spin freely!
- The 135º high-performance cutting edge ensures very high centring accuracy, especially in hand-guided applications with the cordless drill driver.
- The cutting edge prevents slipping when beginning to drill curved surfaces.
- Increased battery life by reducing cutting forces.
- The black chamfer increases wear resistance and prevents cold welding and edge build-up.
- The 40º twist angle enables fast, perfect chip removal and ensures high cutting speeds with increased stability and accuracy.
Datasheets(X)
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 3.5 mm |
Length (l1) | 70 mm |
Chip flute length (l2) | 39 mm |
Shank style | Cylindrical |
Surface | Golden/black oxidized |
Cutting material | HSSE Co5 |
Last viewed
Blind rivet with soft claws and flat head
Hexagonal bolt with flange
TX screwdriver with round shank
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
TIPP® EXPRESS pipe clamp with joint
Round head screw with square neck
Reversible blade
Pin punch
Hexagon nut AN 316, cadmium-plated steel