Twist drill bit, metal Ruko DIN 338 type VA HSCo8 TiAlN
Twist drill bit HSCo8 TiAlN DIN 338 Ruko
DRL-SPRL-RUKO281056EF-DIN338-TIALN-D5,6
Register now and access more than 125,000 products
Datasheets(X)
The drill bit is preferred for use with titanium alloys as well as for rust-, acid- and heat-resistant austenitic steels. It is also suitable for high-strength steels with low toughness. Under certain conditions, this drill bit can be used for special alloys such as Hastelloy, Inconell, Nimonic, etc.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 5.6 mm |
Length (l1) | 93 mm |
Chip flute length (l2) | 57.0 mm |
Shank style | Cylindrical |
Surface | TiAlN |
Cutting material | HSSE Co8 |
Last viewed
Sun protection set UV50
A 900 door handle on outer plate
PURlogic® Premiumpress 1-C foam gun
Wall rack 1000
Work jacket
Cylindrical roller bearing FAG
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain
Cable gland metric, PA, reduced sealing insert
Crimp cable lug, ring connector PVC-insulated
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive