Twist drill bit, metal Ruko DIN 338 type VA HSCo8 plain
Twist drill HSCo8 plain DIN 338 Ruko
DRL-SPRL-RUKO-281011E-DIN338-D1,1
Register now and access more than 125,000 products
The drill bit is preferred for use with titanium alloys as well as for rust-, acid- and heat-resistant austenitic steels. It is also suitable for high-strength steels with low toughness. Under certain conditions, this drill bit can be used for special alloys such as Hastelloy, Inconell, Nimonic, etc.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 1.1 mm |
Length (l1) | 36 mm |
Chip flute length (l2) | 14.0 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSSE Co8 |
Datasheets(X)
Last viewed
Metal core drill bit Ruko HSCo plain Weldon holder
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A2 stainless steel, plain
Plastic barrier post with base for barrier chains
KALTSCHMELZ® device KSG-E Caravan For adhesive-free insertion of variably positionable plastic anchors into frameless lightweight panels
Foam roller WB For water-based paints
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Oval blind rosette Aluminium, inner
Wiring duct, VKW DIN
