Twist drill bit, metal Ruko DIN 338 type VA HSCo8 plain
Twist drill HSCo8 plain DIN 338 Ruko
DRL-SPRL-RUKO-281012E-DIN338-D1,2
Register now and access more than 125,000 products
Datasheets(X)
The drill bit is preferred for use with titanium alloys as well as for rust-, acid- and heat-resistant austenitic steels. It is also suitable for high-strength steels with low toughness. Under certain conditions, this drill bit can be used for special alloys such as Hastelloy, Inconell, Nimonic, etc.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 1.2 mm |
Length (l1) | 38 mm |
Chip flute length (l2) | 16.0 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSSE Co8 |
Last viewed
Pull handle ST/A200
C 6.3 PH bit (1/4 inch)
DUO wire end ferrule With plastic sleeve
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Slotted flat-head screws with small head DIN 920, A1 stainless steel, plain
Hexagon Socket Head Cap Screw
Centre drill bit, SC DIN 333, shape A
Grooved nut with fine thread DIN 1804, A2 stainless steel, plain
ASSY® 4 P CSMP universal screw Steel zinc plated partial thread with underhead thread milling pockets head
Round head screw with square neck DIN 603, steel 8.8, zinc-nickel, silver (ZNSHL)