Twist drill bit, metal Ruko DIN 338 type VA HSCo8 plain
Twist drill HSCo8 plain DIN 338 Ruko
DRL-SPRL-RUKO-281017E-DIN338-D1,7
Register now and access more than 125,000 products
Datasheets(X)
The drill bit is preferred for use with titanium alloys as well as for rust-, acid- and heat-resistant austenitic steels. It is also suitable for high-strength steels with low toughness. Under certain conditions, this drill bit can be used for special alloys such as Hastelloy, Inconell, Nimonic, etc.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 1.7 mm |
Length (l1) | 43 mm |
Chip flute length (l2) | 20.0 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSSE Co8 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Blind rivet, flat head
Clamping rods For airline profiles
Quick-release service coupling With SAE male thread
Binding wire loop Double-twisted
Stretch X vest
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Oscillating jigsaw STP 150 Power-B With bow handle, ideal for working under tough construction site conditions
Hammer drill bit multi-pack with SDS-plus drive arbor Duo-S Vario 12 pcs
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)