Twist drill bit, metal Ruko DIN 338 type VA HSCo8 plain
Twist drill HSCo8 plain DIN 338 Ruko
DRL-SPRL-RUKO-281115E-DIN338-D11,5
Art.-no. 1971000466
EAN 4062856538676
Register now and access more than 125,000 products
Datasheets(X)
The drill bit is preferred for use with titanium alloys as well as for rust-, acid- and heat-resistant austenitic steels. It is also suitable for high-strength steels with low toughness. Under certain conditions, this drill bit can be used for special alloys such as Hastelloy, Inconell, Nimonic, etc.
Standard / drilling depth | DIN 338 / 5xD |
Diameter (Ø) | 11.5 mm |
Length (l1) | 142 mm |
Chip flute length (l2) | 94.0 mm |
Shank style | Cylindrical |
Surface | Plain |
Cutting material | HSSE Co8 |
Last viewed
Fluid leak detector
Deep-penetrating primer
One-handed clamp from VIKING ARM
Copper washer 8 x 16 x 1.5 mm
Furniture glider base module J-Lounge With round screw-on plate
Heat-resistant crepe masking tape +120 °C
File handle
Cable tie KBL 1 made of polyamide with plastic tongue
PE disposal bag with spunbonded fabric
Recessed rocker switch