Type ETA-Q staples
Staple steel zinc plated type ETA-Q resin-coated
STPL-PN-ETA/Q-(A4K)-63MM
Register now and access more than 125,000 products
- Suitable for short, medium, long-term and permanent pull-out and shear stress in compliance with ETA-17/0631
- Specified service life min. 50 years
- Minimum resin length 50 % of the staple length
- For DKN 3065 Combi, 07035560 art. no. and DIGA WO-KN16/75, art. no. 086495
Approved by European Technical Assessment ETA-17/0631 as a dowel-type wood fastener in all European member states
Datasheets(X)
 | |
Width (b1) | 11.3 mm |
Length (l1) | 63 mm |
Wire width | 1.87 mm |
Wire thickness | 1.64 mm |
Raw wire diameter | 1.8 mm |
Material | Steel |
Surface | Zinc plated |
Approval | ETA |
RoHS-compliant | Yes |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Countersunk rivet
Three-hole hook
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Combination wrench, inch with POWERDRIV®
AL 420 balcony door fitting For balcony doors without roller shutter
Round brush LM For solvent-based paints
Façade membrane STAMISOL PERFORM FI 2 TAPE
EPS profile double cylinder