U-shaped cutting knife
Cutting knife U-shaped
CUTKNFE-WNDWREP-U-L40MM
Register now and access more than 125,000 products
Conversion of Fein article numbers to Würth article numbers.
The three digits after 639 03 ... in original Fein numbers are crucial, or the three-digit number punched into the knives.
- If the number begins with 0, e.g. 095, the 0 is replaced with a 5 and the result is given the prefix 0696. In this instance, for example, the Würth article number would be 0696 595.
- If the number begins with 1 or 2, e.g. 126, a 5 is inserted before the 1 or 2 and the result is given the prefix 0696. In this instance, for example, the Würth article number would be 0696 512 6.
Datasheets(X)
Cutting edge length | 40 mm |
Last viewed
EIFS material 160 g, 4 x 4
Twist drill bit HSS DIN 338 type RN 130°
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Ge-shaped handle hole For house doors
Locking system, DPS
Hexagonal nut with flange EN 1661, steel 8, zinc-nickel, silver (ZNSHL)
PU foam cleaner PURlogic® Foam Cleaner
Twist drill bit HSS DIN 1869 R3 type RN
Machinist's hammer German design in accordance with DIN 1041