Welcome to Würth Aerospace Solutions For trade customers only

UV HDPE precision folding masker

Masking paper tape, precision folding masking tape
COVFLM-ADHSTR-UV-PRECISION-180CMX20M

Art.-no. 0992409180
EAN 4058794052817

Prices for customers after login
UV HDPE precision folding masker

Art.-no. 0992409180

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Pre-folded cover film with a very thin and supple special paper tape for demanding indoor and outdoor masking work. Precise bonding for fine paint edges with no paint bleeding.

Very thin and soft tearing paper


  • Enables extremely precise bonding

  • Crisp, sharp and super-flat paint edges without running paint

  • Particularly fine paint edges without running paint

  • Special paper ideal for both solvent- and water-based paint systems


Special acrylate adhesive offers great adhesion and allows gentle bonding to sensitive surfaces in the construction and automotive sectors, such as wallpapers, furniture and chrome trims, with residue-free removal.



High-quality, static, corona-treated HDPE film


  • Good adhesion to most substrates due to electrostatic charge

  • Prevents paint from flaking off or running uncontrollably

  • Can be torn off in a straight line by hand


The UV resistance of this product is up to four months, which ensures maximum safety even in the case of bonding outdoors.

Notice
  • The tape must be pulled off when dry

  • Not suitable for use on carbon, zinc, lead (also lead-based paint), copper, anodised metals, natural stone (marble etc.) or aged or weathered PVC.

  • Exercise caution with paints containing zinc or zinc oxide, since residues may be left.

  • On critical substrates such as parquet, laminate, linoleum or other surfaces that will be visible later, adhesive residues or surface tearing cannot be ruled out.

  • When grouting tiles with sealant, the tape must be removed before the drying process is complete as otherwise the tape will be difficult to remove.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Masking work for painting applications, especially with sensitive surfaces and masking outdoors.


Masking work for painting in the automotive and metalworking sectors, especially with sensitive surfaces. Excellently suited for oven drying.


Masking in glazing technology.

Instructions

To ensure optimal adhesion, the surface must be cleaned before use. The surface should be dry and free from dust, oil, solvents or other chemicals. Unroll the adhesive tape from the roll and press it firmly onto the desired surface. Then unfold the film.


Do not leave the adhesive tape on the substrate for longer than the time specified or it may leave a residue. After drying, remove the tape evenly and carefully at a 45° angle.

Adhesive tape backing material

Tear paper

Foil backing material

Polyethylene

Adhesive base

Acrylate

Colour

Yellow (base material), Transparent (film material)

Length of roll

20 m

Width (opened out)

180 cm

Foil thickness

9 µm

Thickness of adhesive tape

87 µm

Adhesive force on steel (per unit of length)

1.7 N/cm

Elongation at break

3 %

Min./max. processing temperature

5 to 40 °C

Max. temperature resistance

100 °C

Conditions for temperature resistance/temperature conditions

max. 20 minutes

Moisture resistance

Yes

Ultraviolet resistance

4 months, outdoor weathering

Resistance against

Weather

Max. usage duration

4 Month

Shelf life from production/conditions

Unlimited / cool, dry and frost-free storage area that is protected from UV rays

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information