Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products

Name: Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products
Brand: Würth
SKU: 0891110500

Underbody seal cup gun
UBSSPRGUN-CUP-GUN

Art.-no. 0891110500

EAN 4065233043398

All versions

Similar products

Prices for customers after login

Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products

Art.-no. 0891110500

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For applying solvent- and water-based stone chip protection, undercoating and cavity sealing products

This gun has a cup that can hold standard cans, so it can be used flexibly.

For restoring original structures of sills, wheel arches, undercarriages etc.

Very safe to use

Clean and easy to use

Notice

Probes not included

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For applying solvent- and water-based gravel guard, undercoating and cavity sealing products

Additional accessory:

Product

Description

Quantity

Price
/PU

Probe set for UBS cup gun 3 pieces

PRB-SET-F.UBSSPRGUN-3PCS

Art.-no. 0891110001

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).