Underlay/non-breathable membrane STAMISOL EXTREME PACK 500
Underlay membrane/roof protection film STAMISOL EXTREME PACK 500
ROOFUNDRLAY-STAMISOL-PACK-L25XW2,6M-65SM
Register now and access more than 125,000 products
Robust and durable
Resistant to UV radiation, driving rain and the extreme weather conditions of high mountain regions
Compression-resistant and puncture-proof according to DIN 4426
Ensures a high level of safety during installation
Weldable and bondable
Weldable at all outdoor temperatures and also bondable at temperatures over 5°C
Stamisol roof protection films and façade membranes must only be combined with accessory products from the Stamisol system!
The mechanical properties specified in the product information are mean values with a tolerance of ±10%.
* Temperature resistance according to requirements of system warranty!
ETA-16/0986
Meets the requirements of the ZVDH product data sheet for class UDB/USB.
Datasheets(X)
- For bonding to wood, metal or plaster substructures
- Suitable for use in high mountain regions
- For all roof coverings (except non-ventilated slate roofs)
- Suitable for all substrates
- Suitable for installation directly on insulation/suitable for all roof structures
Design | Without self-adhesive strips |
Coating weight per m² | 520 g |
Length of roll | 25 m |
Roll width | 2.6 m |
Area | 65 m² |
Number of rolls per pallet | 25 PCS |
Material | PVC - Polyvinyl chloride |
Min./max. temperature resistance | -40 to 100 °C |
Thickness | 0.5 mm |
Suitable for makeshift roofing/makeshift coverage | 24 Month |
Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501-1 |
Air layer thickness equivalent to water-vapour diffusion/conditions | 0.95 m / in accordance with EN 1931 |
Resistance to penetration of water | W1 |
Resistance to tear propagation (longitudinal) | 500 N |
Resistance to tear propagation (transverse) | 800 N |
Longitudinal tensile force per 50 mm | 2500 N |
Transverse tensile force per 50 mm | 1500 N |
Stretch capacity/conditions | 32 % / in accordance with DIN EN 12311-1 |
Max. cold bending temperature/conditions | -40 °C / in accordance with EN 1109 |
Min. processing temperature | 5 °C |
Max. processing temperature | 60 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!