Union nipple
Socket union brass
SKTUN-BRS-DN12-AG-G1/2IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1/2 inch |
DN nominal width | DN 12 |
Internal diameter | 16.0 mm |
Width across flats (SW) | 24 mm |
Length | 19 mm |
Last viewed
Hexagon Socket Head Cap Screw with low Head
Ear plugs uvex com4-fit
Shim ring
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S3
Ratchet combination wrench set 6 pieces
ASME B18.5 steel A307 A zinc plated
Allen key
CLIP-O-FLEX® holder Varioflex extended, open Bracket without base with extended opening
CERAfix® 316 sealing tape