Union nipple
Socket union brass
SKTUN-BRS-DN16-AG-G3/4IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 3/4 inch |
DN nominal width | DN 16 |
Internal diameter (DI) | 20.5 mm |
Width across flats (SW) | 27 mm |
Length | 21 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Rechargeable battery Li-ion 18 V BASIC M-CUBE
HHS® Clean adhesive lubricant pre-cleaner
Hercules S3 safety boots
Weld-in bulkhead fitting ISO 8434-1, stainless steel 1.4571
Safety boots, S2
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
Linear grid with fern design For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels
HPC end mill Speedcut 4.0-Inox, long, optional, four cutting edges, uneven angle of twist gradient
Colour – blind rivets Round pan head
Locking system, DPS
