Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G1IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 inch |
DN nominal width | DN 20 |
Internal diameter | 25.4 mm |
Width across flats (SW) | 36 mm |
Length | 23 mm |
Last viewed
VDE metric box-end wrench
Bitumen tape with aluminium lamination
Short sanding belt Klingspor LS 309 XH
Hexagonal bolt, fully threaded with nut, SB fittings, DIN EN 15048-1 ISO 4017, A4-70 stainless steel, plain, with nut ISO 4032
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Hammer head bolt with square neck DIN 186, A4 stainless steel, plain
Hexagonal bolt with flange in accordance with MBN standard
90° HSCo WN type RN TiAlN NC spotting drill bit
Tungsten carbide bur with STEEL teeth
Shoe accessories