Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G1IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 inch |
DN nominal width | DN 20 |
Internal diameter (DI) | 25.4 mm |
Width across flats (SW) | 36 mm |
Length | 23 mm |
Datasheets(X)
Last viewed
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated thick-film passivated (ZSML)
Cavity wall appliance socket windproof
Safety boots, S1
Nail anchor W-ND Countersunk head
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
EPS profile double cylinder
Hinge pin For shutter hinges
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Round head square neck bolt
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
