Union nipple
Socket union brass
SKTUN-BRS-DN8-AG-G3/8IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 3/8 inch |
DN nominal width | DN 8 |
Internal diameter | 12.0 mm |
Width across flats (SW) | 17 mm |
Length | 17 mm |
Last viewed
Tipp® VDS loop hanger For fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain
Flat-head screw with H cross recess ISO 7045, A2-70 stainless steel, plain
Tapered pin, unhardened DIN 1 unhardened A4 stainless steel plain
1/2 inch angled extension
HSCo Multi Longlife machine tap for through holes DIN 371/376
Low-cut safety shoes, S2
Twist drill bit HSCo DIN 340 type RN OXIDE
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S2