Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 27–42 mm
UNIADAPT-F.CLSYSTEST-085350
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
Oil change tag
NOMEX® shoelaces
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Injector claw
HSCo 90° green-ring countersink DIN 335C
Die set/kit Ruko thread cutting tool set HSS 37 pieces
VS COR Fold storage basket set For corner cabinet fittings
1/2-inch impact socket wrench insert For hexagon socket screws, metric, long
Quick-mount NPH screw
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain