Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 27–42 mm
UNIADAPT-F.CLSYSTEST-085350
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
Drawer divider set, BASIC KWB, 16 compartments
Combi hexagon tapping screw with captive washer
System insert 4.4.1, drift punch and striking tool
Concealed hinge TIOMOS click-on 120
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
EPS profile double cylinder
Premium lambswool
Filling system REFILLO®
Step drill For Fixograss 9000 drilling jig
Connecting technology