Universal folding support 9
Universal flap holder 9
FLPHOLD-UNIVERSAL-9MM
Register now and access more than 125,000 products
- Opening angle: max. 110°
- Flap height: max. 500 mm
- Load capacity: 9 kg
- Can be used on left or right
- Material: Die-cast zinc, nickel-plated
- Sturdy, looks great
- Easy and quick to attach the fitting, brief installation time thanks to clip assembly
One fitting, three functions:
- Retaining: The flap stays still in any opening position for easy opening and closing.
- Braking: The flap clicks into the highest setting and gently slows down when closing.
- Flap holder: Adjust to use as a flap holder.
Installation tip:
- Secure the lid flap using 3.5 x ... Assy screws; the side flap with a 32-mm hole is secured with Euro screws, type A, head diameter: 7.4 mm.
- Different attachment points on the lid flap allow for different opening angles.
- The fitting is set as standard to the medium retention level. After installation, the strength must be adapted to the weight of the lid. In a pair arrangement, you must set both at the same time.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Load capacity | 9 kg |
Last viewed
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Electric strike, type S
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Cable grommet with cross recess membrane, PVC
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexalobular-type cheese head screw, low head ISO 14580, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Cylindrical pin, hardened DIN 6325, steel, plain
Warning flag
Storage box with cover
Hexagon Socket Head Cap Screw