Universal system plate
System sign for rope system Universal
SYSSIGN-C258
Register now and access more than 125,000 products
- Mounting on intermediate or end/corner support (only with 40/43 mm diameter) with DIBt National technical approval or European Technical Assessment (ETA)
- Continuous fall arrester on roofs and on/in buildings for ergonomic work
- Reduced force transmission to the structure through defined plastic deformation of the single anchor points in the event of a fall
- Resistant to corrosion and weathering: made of stainless steel (min. A2)
- 8 mm thick stainless steel cable (V4A)
- Aluminium system sign with relevant system data
Observe the installation instructions and approvals for the fasteners and single anchor point.
- DIBt National technical approval Z-14.9-868
- Also certified in accordance with DIN EN 795:2012 Type C (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of 3 persons in connection with personal protective equipment against falling
- Installation possible on the roof, overhead and in buildings
- Installation possible on single anchor points with national technical approval, European Technical Assessment (ETA), approval in individual cases, DIBt National technical approval, project-related type approval (Berlin) and measured rigid surfaces (steel, concrete components)
Length | 210 mm |
Material | Aluminium / aluminium |
Colour | Aluminium coloured |
Last viewed
Plastic frame anchor SHARK® UR F Zinc-plated steel
Plastic hose connector assortment 155 pieces in system case
Twist drill bit HSCo DIN 340 type RN OXIDE
Neck protector
Pneumatic impact screwdriver DSS 1/2 inch Premium Power
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A4 stainless steel, plain
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Safety goggles Spica®
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank