Upgrade set for the Original Prusa XL
SP-UPGRADE-PRUSA-XL-1TO2TOOLHEADS
Art.-no. 4954628340
EAN 4068362346637
Register now and access more than 125,000 products
Scope of delivery
Upgrade from one to two tool heads
- 1x 0.4 mm nozzle (for the existing Nextruder)
- 1x XL Multi-Tool Nextruder
- 1x tool changer
Datasheets(X)
- Install one of the upgrade packages to increase the number of available tool heads and expand your 3D printing options.
- Additional extruders allow you to combine different materials and print in multiple colours with little to no waste.
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
- Needle-nose pliers
- T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Manufacturers | Prusa |
Last viewed
Application tube, transparent for AKP 12-A-330 and AKP 18-A-600
1/2 inch socket wrench insert, metric
ZD 4 handle hole
Manual release for Compact workshop trolleys
Wedge lock washer W.TEC, wide shape
O-ring, imperial NBR 70
Pull-out rail for Compact workshop trolleys
Assembly set For mounting the water collection rings on the drilling stand
Pin punch in accordance with DIN 6450 form C with hardened impact head
Conversion kit for blind rivet screws