Upgrade set for the Original Prusa XL
SP-UPGRADE-PRUSA-XL-2TO5TOOLHEADS
Art.-no. 4954628342
EAN 4068362346651
Register now and access more than 125,000 products
Scope of delivery
XL Dual-Tool Nextruder upgrade from two tool heads to five tool heads
- 3x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
Including spool holder and Prusa Nextruder sock
- 1x XL electronic expansion set
- XL splitter board
- Additional power supply
- 2x 0.4 mm nozzle (for existing Nextruders)
Datasheets(X)
- Install one of the upgrade packages to increase the number of available tool heads and expand your 3D printing options.
- Additional extruders allow you to combine different materials and print in multiple colours with little to no waste.
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
Needle-nose pliers - T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Manufacturers | Prusa |
Last viewed
Lock washer VS Spring steel, mechanically applied zinc coating
PLL-A universal bracket
Polishing Paste for sisal/cloth rings, polishing rings
Silicon carbide abrasive mesh For manual and machine processing
Serrated locking nut Similar to DIN 6923, A4 stainless steel, Gleitmo 615, with locking teeth
Serrated locking nut Similar to DIN 6923, A4 stainless steel, Gleitmo 615, with locking teeth
Centre punch jig Vionaro H89/121/185/249
Setting mandrel
Half-shell hexagon crimping insert
Round-headed strip nails, 21° with ring shank. Zinc-plated steel, blue passivated (A4K)