Upgrade set for the Original Prusa XL
Tool head upgrade 2 to 5 tool heads Prusa XL
SP-UPGRADE-PRUSA-XL-2TO5TOOLHEADS
Art.-no. 4954628342
EAN 4068362346651
Register now and access more than 125,000 products
Scope of delivery
XL Dual-Tool Nextruder upgrade from two tool heads to five tool heads
- 3x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
Including spool holder and Prusa Nextruder sock
- 1x XL electronic expansion set
- XL splitter board
- Additional power supply
- 2x 0.4 mm nozzle (for existing Nextruders)
Datasheets(X)
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
Needle-nose pliers - T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Manufacturers | Prusa |
Last viewed
Superglue Klebfix 4-in-1
Slide shoe for door closer with slide rail
Cut protection gloves Mapa KryTech 644
Sink cabinet
Hexagon nut, inch ASME B18.2.2, 18-8 stainless steel, UNC (comparable to ISO metric thread)
Work dungarees Bodyforce 3125 5302
SNAP marker
Low-cut safety shoes, S1P Uvex 2 Trend 6937
Safety boots, S2 Steitz VD PRO 3800 GTX
Heavy-duty clamping pin Plain spring steel, type S