VWM in-front-of-wall mounting system
Pre-wall installation system VWM Set
PREWLINSTL-SYS-VWM-SET-180X110X1200MM
Art.-no. 0479742118
EAN 4046777426489
Register now and access more than 125,000 products
- Comprehensively tested exterior insulation foam module (system test by IfT Rosenheim)
- Projections of 80 mm to 200 mm possible
- Easy integration into the ETICS using the supplied insulation block, VWM window buck can be plastered over straight away
- Reduces structural thermal bridges
- Complies with the requirements of EnEV
- The window buck can be used flexibly for different window sizes
- The window buck can be cut to size using conventional chop saws
- Easy installation and attachment of the window element
- Combined bonded and mechanical attachment for secure load transfer on common structural substrates
- Optimal and economical sealing of the window connection joint within the plane of the window buck
- Optimum acoustic insulation
- Windows can be replaced during renovation or repair work without damaging the façade/ETICS
System consists of:
- VWM window buck 80 x 80
Window buck format adapted to popular profile and window systems for characteristic application when window is directly mounted in the transition area between the wall shell and insulation/ETICS.
- VWM window buck 140 x 90
For projections up to 140 mm. Suitable for windows with larger installation depths or windows with roller shutter add-on systems.
- VWM window buck 160 x 110; 180 x 110 and 200 x 110
Allows particularly large projections of 160 mm, 180 mm or 200 mm. Suitable for window installation in front of the supporting wall with 2-shell construction and faced brickwork or if particularly high insulation thicknesses are to be implemented.
- VWM construction adhesive
High-quality, neutral and permanently elastic 1C special adhesive and sealant for bonding and sealing VWM exterior insulation foam modules. Good initial adhesion and easy processing. Excellent adhesion to common surfaces such as
- Concrete
- Autoclaved aerated concrete
- Clay brick and calcium silicate block
- Wood
Porous surfaces may require priming before applying.
Ensure adhesion surfaces are dry, suitable, clean, dust- and grease-free when applying.
Observe the application instructions.
Sets each consist of VWM window buck, VWM insulation block and VWM construction adhesive - delivered on a standard Euro pallet
- Observe the RAL guidelines on assembly and planning of windows and house doors when planning and assembling (art. no. 5995 000 000).
- When mounting, special case 1 or, if applicable, special case 2 are to be taken into account, if there are special requirements.
- It is important to check that installation has been performed correctly for the specific construction conditions (e.g. weight of window casement, surface properties). When planning and selecting suitable fasteners, their properties (e.g. application surface, edge spacings, loads) need to be taken into account.
- The pre-wall mounting system VWM is not suitable for the attachment of accident-proof glazing in accordance with the German technical regulations for safety glazing (TRAV) or DIN 18008-4.
- Instructions for processing can be found in the processing guidelines/mounting instructions.
- Technical data and other product documentation can be found at www.wuerth.de
Datasheets(X)
The Würth pre-wall mounting system VWM consists of
- Mounting bracket VWM
- Insulation block VWM
- Mounting adhesive VWM
It is suitable for the quick and secure mounting and sealing of window, balcony and terrace doors in front of supporting walls in the insulation layer of the ETICS, with two-shell construction and brick facings.
- The mounting bracket VWM is bonded to the supporting wall around the full circumference of the window/door opening, sealed and additionally mechanically fastened with a suitable dowel system. The mounting bracket and insulation block are precisely cut with a mitre saw. Offcuts can be further utilised.
- Connect mounting bracket with wood connector plates and bond joints.
- The window elements are installed in the mounting frame, aligned and mechanically fastened.
- The window connection joint is optimally sealed on the surface of the mounting bracket VWM.
- Finally, the mounting bracket can be covered by the subsequent ETICS and directly plastered over.
Further detailed information on processing can be found in the processing guidelines/mounting instructions.
Dimension VWM | 180 x 110 x 1200 mm |
Max. throat depth | 180 mm |
Content (rm) | 48 m |
Last viewed
Internal tab washer DIN 462, plain steel
O-ring, metric
Helical insert W.TEC® INSERT COIL Free Running fine thread
Low-cut safety shoes, S2 Steitz CP 4300 ESD
MINI flap holder, type DW with rope pull
Machine screw tap, through hole Ruko M DIN 376 HSCo VAP shape B
Ring screw DIN 580, steel C15E, plain
Electronic solder no. 1
Work trousers Kübler Vita Cotton+ 2L46 3421
Work shirt Kübler T-shirt 5020 6211