Vaku hardener

Name: Vaku hardener
Brand: Würth
SKU: 0892600006

Hardener for filler VAKU 30 dispenser system
HARD-FILR-(VAKU 30)-DSPSYS-60G

Art.-no. 0892600006

EAN 4047376169340

All versions

Similar products

Prices for customers after login

Vaku hardener

Art.-no. 0892600006

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Putty hardener for VAKU 30 dispenser system - 60 g

Notice

Please refer to the relevant technical data sheets for details of the exact mixing ratios and properties.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Filler hardener for use in the dispenser system

Weight of content	60 g
Colour	Red
Smell/fragrance	Characteristic
Max. temperature resistance	80 °C
pH value	Slightly acidic
Density	1.1 g/cm³
Density conditions	at 20°C
Water-soluble	No
Viscosity/consistency	Pasty
Viscosity	10000 mPas
Viscosity conditions	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.