Variable designer glass shelf support
Variable designer glass shelf support
SHLFSPRT-INSERT-GLS-ZD-(NI)-4/10MM-PLGD5
Register now and access more than 125,000 products
- 5-mm diameter pins
- Clamping range: 6–10 or 8–12 mm
Material: Die-cast zinc, nickel-plated, with translucent rubber top
- High degree of resistance to breakage
- Elegant, high-quality surface
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Drill diameter | 5 mm |
Min. drill hole depth | 8 mm |
Min. glass thickness | 4 mm |
Max. glass thickness | 10 mm |
Last viewed
A 505 door handle
System insert foam for ORSY® system case 8.4.5
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Flat washer
Brake line nipple, type L
Hexagonal bolt with flange
Work trousers
Countersunk screw with hexagon socket head
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment