Welcome to Würth Aerospace Solutions For trade customers only
Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR
Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR - 1
Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR - 2
Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR - 3
Vehicle basic cleaner - CLNR-VEH-BASIC-20LTR - 4

Vehicle basic cleaner

Vehicle basic cleaner
CLNR-VEH-BASIC-20LTR

Art.-no. 08934751
EAN 4024835620543
All versions

Prices for customers after login
Vehicle basic cleaner

Art.-no. 08934751

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Environmentally friendly cleaning concentrate for basic cleaning during professional vehicle treatment

High cleaning performance


  • Road dirt, oil, grease and other contaminants are removed quickly and thoroughly

  • Can be applied manually and with HP device


Concentrate


  • Can be matched to particular types of contamination

  • Economical to use

  • High yield

  • Low cost


Oils and greases are penetrated and separated


  • Fast separation in accordance with German Ecological Standard Test B5105

  • The resulting wastewater can easily be separated with the light-oil separator


Optimised material compatibility



Free of phosphate and volatile organic solvents. AOX-free.


  • Hazard potential in daily use is reduced

  • Reduces pollution

  • Complies with local waste water ordinances

  • Not labelled in accordance with (EC) No. 1272/2008 (CLP Ordinance)


Biodegradable


Surfactants completely biodegradable in accordance with (EC) No. 648/2004 (Detergent Regulation)



Silicone-free

Notice

Do not spray on hot surfaces or in sunlight. Do not let it dry out. Protect from frost.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Depending on the degree of soiling, dilute the cleaner with water and spray on the dirty vehicle surfaces. After an appropriate application time, rinse off the surface with clear water. In case of stubborn dirt, boost the cleaning effect with sponge or brush. Repeat the process if necessary.

Instructions

Mixing table:


  • Soiling: normal

Manual: 1:20


HP device: 2–3%


  • Soiling: heavy

Manual: 1:5


HP device: 3-5%

Contents

20 l

Product weight (per item)

21716 g

Container

Canister

Smell/fragrance

Mild

Colour

Blue

pH value / conditions

8.5 / undiluted

Mixing ratio

1:1 - 01:20

AOX-free

Yes

Silicone-free

Yes

Phosphate-free

Yes

Bio-degradable

Yes

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Plastic tap DN 60 connection
Plastic tap DN 60 connection

TAP-(F.PLACANI-20/60LTR)

For plastic canisters with DN 60 connection for 20 L/25 L and 60 L
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Compressed air cleaning gun
Compressed air cleaning gun

CLNGUN-PN-ENGCLNR-750ML

For use with Würth utility vehicle, workshop and service cleaners and other cleaners together with high-pressure devices or steam jets
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 4
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details