Vehicle finishing disc
Finishing disc
DSPAP-SG-2000-D50MM
ZEBRA
Register now and access more than 125,000 products
Significantly shorter grinding and polishing times
Outstanding removal rate with up to 6x higher grinding performance.
Full-surface extraction
Thanks to the foam-mesh fabric, the sanding dust is extracted thoroughly from the entire surface, resulting in a uniform grinding finish.
Pressure-equalising, absorbent and permeable
The uniform structure of the foam material guarantees the controlled absorption and release of water.
Safe operation
The foam material prevents pointed pressure on the surface - The risk of sanding through on edges, beading and curves is reduced to a minimum.
Ideal for wet and dry sanding.
Form | Washer |
Diameter (Ø) | 50 mm |
Grinding pattern | 2000 |
Adhesive system | Hook and loop |
Material of abrasive medium | Aluminium oxide |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Rust remover Rost-Off
Work jacket
Jacket Planam Highline
180° double elbow, with solder connection on both sides EN1254, copper, 5060
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Pan head tapping screw, shape F with Z recessed head
Sound and decoupling panel CERAfix® 206 For top coverings such as ceramics, natural stone, parquet and after spreading under carpets and plastic coverings as well
U-holder For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Twist-on anchor, rigid For installing aluminium and plastic windows in the reveal
