Ventilation grille with covering edge
Ventilation grille plastic
VENTGRIL-PS-(A2-OPTIC)-MATT/NICKEL
Register now and access more than 125,000 products
- Air inlet 200 cm², meets the requirements of the equipment industry
- Large clamping range from 2 mm to 23 mm
- Flexible use, limited stock required
Subject to technical changes! Specified dimensions not binding.
Datasheets(X)
The ventilation grille can be inserted in the cut-out from the front or from above. Secure the ventilation grille from the rear using adjustable click-in clips. When assembling from above, you can increase the air flow by enlarging the cut-out. Countersink with 10-mm mill.
 | |
Material | Plastic |
Colour | Stainless steel coloured |
Length | 458 mm |
Width | 65 mm |
Air vent | 200 cm² |
Min./max. grip range | 2-23 mm |
Min. grip range | 2 mm |
Max. grip range | 23 mm |
Milled-hole length | 448 mm |
Milled-hole width | 56 mm |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
Hexagonal bolt with thread up to the head
Slide hammer for internal pullers with M7 and M10 thread
Square spacer piece For beam clamp support clips type BG1
Abrasive cloth roll VSM ZK713X
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
High-visibility trousers
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Hexagonal bolt with thread up to the head